New customers who've started looking for temperature facts loggers to monitor their freezers and refrigerators generally ask, "do you have a new temperature data logger that you could put in your fridge? " Based on your past experience with some customers who've tried this approach, we recommend you don't keep the temperature data logger from the refrigerator! This sounds straightforward, but it's certainly easier than knowing how to place a probe while in the fridge. However, there are four logic behind why you don't want that will put the temperature data logger website while in the refrigerator.

Reducing Signal
If the "wireless temperature data logger" is needed with WiFi, bluetooth or others of wireless data, the metal casing belonging to the refrigerator significantly reduces the actual "wireless" signal. It's like trying to use your phone throughout an elevator. Sometimes this works, sometimes it doesn't. If the fridge features a glass door, a signal might be received. But if cabinets and doors are constructed with metal, they rely on signals to eliminate small gaps around the door seals. Typically, this leads to a significant reduction in signal strength, which brings about very limited or intermittent operations.

Reducing Battery Capability
Another important reason is always that the low temperature in the particular refrigerator can greatly lower the battery capacity. As a rule of thumb, the type of lithium battery most very popular in temperature data loggers is Fifty percent cooler at 0°F. In low temperature, the internal resistance on the battery increases and the output voltage decreases. In other words, this can lead to be able to frequent battery changes. Some customers utilize the popular "USB Logger" collection, which complains of only a month of battery existence. These loggers are surprising all around health typically run for six to nine months on some batteries. It was later discovered the fact that recorder had been placed directly in a very refrigerator operating at 0°F.

Delaying Display
If the device provides an LCD and should read data or alarm information through the display, it can always be difficult at low heat. The standard LCDS utilised in most low-cost temperature data loggers are intended to run at temperatures as long as 32 degrees Fahrenheit. Should the temperature drops, the display responds very slowly, so the data within the screen may no longer be capable of be updated. Usually, the monitor seriously isn't permanently damaged. It works well during preheating, but your LCD may malfunction with low temperatures.

Condensation Destruction
After all, there is definitely a risk that this temperature data logger is going to be damaged by internal condensation when its removed from the refrigerator. At some point, the device is usually pulled out from the refrigerator to download this stored data. On warm days, leaving the cold data recorder on the table is like making a glass of ice water about the table. If the dew point is over the temperature of the recorder coming out of the refrigerator, condensation happens. Everyone knows that mineral water and electronics don't selection well! We received several protection equipment which showed evident signs of internal moisture damage due to condensation. Even if the main bug can be predetermined, there is usually a new potential problem, and it is suggested to do so.

I am aware it is. 4 reasons you can not put your temperature data logger while in the fridge. This may could be seen as a task, but overall, it's a good idea to put in the temperature data logger outdoors the refrigerator and function the probe inside. The easiest and most common method would be to pass the probe line from the door seal. Protection having small aluminum foil tape (for HEATING AND AIR CONDITIONING applications) prevents door dress yourself in.