Your difference between wire to help wire connector and insert to board connector
So far as we know, the two main different types of the connector is this wire to wire connector along with wire to board connector. and both of these have their own functions. This article mainly introduces the differences through the following aspects.



Content listings:



Brief introduction of that wire to wire connector and wire to board connector.

The highlights of the wire to insert connector and wire for you to board connector

The applications with the wire to wire connector plus wire to board connector



Brief introduction from the wire to wire connector along with wire to board connector

The defining feature of a wire to wire connector usually two individual wires or perhaps the corresponding wires within two wires are permanently connected to each other. Such permanent connections tend to be more common in fixed-wire cable connections and IDC connections.

The so-called wire to board connector is really a connector for connecting a wire plus a circuit board, and a neutral line slot for positioning the predetermined wire is disposed around the insulating base of the connector, and one side with the insulating seat is formed that they are connected to the exterior. Beside this, there are usually other similar connectors, just like wire to wire connector plus rast connector a buttocks joint, and a plurality connected with contact terminals disposed around the joint, and one end of each contact terminal is given a welded portion passing with the insulating seat to the actual neutral wire groove and connecting using the predetermined wire, wherein The plurality of contact terminals possess a transverse U-shaped outer form, and the bottom of every contact terminal is given a soldering portion using a long distance and being positioned around the inner surface of this neutral slot, and the contact terminal is further supplied with an upward reverse bend and surrounding a contact portion around the periphery of the bowl, one end of this contact portion being linked to the welded portion. With this particular structural design, the height belonging to the connector can be successfully reduced, the contact airport is fastened, the contact area is simple to grasp, the make contact with effect is good, plus the impedance is low. The function on the connector is mainly that will transmit power and data. Therefore, the wire to mother board connector can be reported to be the ancestor of the many linkers.

So from the meaning, the main difference between them is the fact that one is wire for you to wire, but another can be wire to board.



The top features of the wire to insert connector and wire for you to board connector

The wire to wire connector is put through T6 heat treatment. The outer appearance adopts steel pellet sand disposal together with good air tightness, wonderful appearance, simple operation along with installation. It is convenient to accomplish the effect of for no reason giving off odor, plus saves the tedious installation, maintenance and connection in the old ground and underground water storage bend. The actual wire to wire connector spouse and children contains rectangular, circular, subminiature-D and ribbon connectors. Coaxial connectors are portion of this series, but will be conversed separately for high frequency use in the future.



For the features from the wire to board connector, firstly, the appearance is treated with stainless shot sandblasting, which possesses good air tightness and beautiful appearance. secondly, Tiny pitch, ultra-thin material, large precision; surface treatment accommodates customer needs. thirdly Insert to board connectors usually are flexible and economical.





The applications from the wire to wire connector and also wire to board connector

For your wire to wire conector, their products are mainly used in automobile, communication, consumer consumer electronics, data processing, industrial machinery and various fields. Currently, wire to wire connector is additionally developing towards standardization as well as customization. Product brands can be getting more attention.

For that wire to board connector, There are plenty of kinds of wire to be able to boards. according to plenty of purposes and requirements, but most are in the details industry. The distance between the pin and the foot and the recent and voltage transmitted widely-used as a distinction. products are maily used in White goods, Copiers, Business office equipment, Printers, Automation machines, Industrial networks, Rack-mount machine, Router/Switch, etc.



Through this above introduction, let us know the difference between wire to be able to wire conector and wire to board connector in numerous aspects. This will also facilitate your understanding and comparison of those products. I hope that it'll be useful for you to settle on the right conectors while in the later period.
https://www.hrb-connector.com/Wire-to-Wire-Connector-pl504495.html